Another 66” Non Slam Check Valve in production at our UK based check valve manufacturing facility.
This check valve has been design and manufactured for use in a sea water processing application. In such application, the non-slam sea water check valve will be fitted with Ebonite rubber lining – this procedure is also conducted by Europa Valve.
The carbon steel valve body with ebonite rubber lining is the most cost effective way to produce large diameter Non Slam Check Valves for salt water service.
Here we have some Non Slam Check Valves which are just finishing manufacture and currently just completing coating.
These 10” and 12” Nozzle Check Valves have been designed and manufactured in the UK by Europa Valve and will soon be shipped to the Philippines for use in a gold mine.
The client has specified these check valves due to their extremely rapid response on a high critical application.
If you require any further information or have a similar application and require further technical information, please do not hesitate to contact our check valve engineering department here in the United Kingdom.
Another 42” Class 600 Weld End Non Slam Check Valve by Europa Valve. Here we see the Check Valve, skidded and loaded, ready for shipping to a customer in North America.
The check valve will be placed at the discharge section of a centrifugal compressor to eliminate backflow through the compressor. Should backflow occur, the compressor can experience damaging reverse rotation. Therefore, this is a very critical application and represents a typical installation location and requirement for Europa Non Slam Check Valves.
The presence of a discharge check valve also provides the benefit of isolating each of the antisurge recycle loops.
This non-slam check valve will go into service for more than 20 years without the need for maintenance or servicing whatsoever.
Europa Valve was founded to manufacture high quality high performance non slam non return valves for the oil and gas, desalination, water and other process industries.
In 2007 Europa Valve identified that our worldwide customer base had even faster delivery requirements. To facilitate this we made an extensive capital investment and built a foundry in a facility connected to our works.
In 2009 Europa Valve was certified under the PED (Pressure Equipment Directive).
In 2012 the company continued to strive forward into new markets and has been developing new products to be introduced after rigorous testing in the near future.
Today Europa Valve continue to manufacture and supply quality Non Slam Check Valves, Axial Check Valves and In Line Check Valves to the world’s oil, gas and desalination industries.