Non Slam Check Valve Machining

Non slam check valves going through machining in our UK based valve manufacturing facility.

These are 16” and 20” class 600 and 900 check valves in ASTM A216 WCB (Carbon Steel).

You will also see a very short video showing valves flange holes being drilled on a 5 axis CNC Horizontal Machining Centre which ensures unparalleled precision and quality.

All our design, machining, assembly and testing are carried out right here in our facility in the UK ensuring ultimate quality.

If you wish to visit our facility please contact our sales department and they will be happy to arrange a visit.

Axial Non Slam Check Valves

Another selection of Europa non-slam check valves which were shipped last week. These check valves were designed and manufactured by Europa Valve, for a Natural Gas Compressor station in North America.

In such projects, it is typically specified that there will be 30” Class 600 Non Slam Check Valves on discharge of compressor and then smaller 12” or 16” check valves used on recycle loop to allow soft start-up of compressor.

The Axial Non Slam Check Valve is the optimum check valve for this critical application as its gives the extremely fast shut off required to protect compressor. This combined with the aerodynamic design to allow for very low pressure drops.

Europa Valve are a UK based check valve manufacturer. If you need any further information please do not hesitate to contact our engineering department and manufacturing location both in the United Kingdom.

UK Designed

UK Manufactured

UK Material