Another selection of Europa non-slam check valves which were shipped last week. These check valves were designed and manufactured by Europa Valve, for a Natural Gas Compressor station in North America.
In such projects, it is typically specified that there will be 30” Class 600 Non Slam Check Valves on discharge of compressor and then smaller 12” or 16” check valves used on recycle loop to allow soft start-up of compressor.
The Axial Non Slam Check Valve is the optimum check valve for this critical application as its gives the extremely fast shut off required to protect compressor. This combined with the aerodynamic design to allow for very low pressure drops.
Europa Valve are a UK based check valve manufacturer. If you need any further information please do not hesitate to contact our engineering department and manufacturing location both in the United Kingdom.
UK Designed
UK Manufactured
UK Material